For those who made the jump from the Behringer X/M 32 Digital Mixers to the Behringer Wing Rack, the signal path from the mixer to your DAW is not the same. With the X/M 32 Mixers, it was Input > Preamp > LC – Expansion Card Out > DAW In. With the Wing Rack, the channel fader now plays a part as you will see in the video below.
EDIT: I downgraded the firmware and reinstalled the 3.0.6-25 version and everything works as it should now. The input into Reaper is set by the gain and the fader movement does not affect it at all.
WING Copilot is a companion app for the Behringer WING digital mixing console. It enables…
The Wing Presets Zip Folder contains the following items. Reaper layout in 48K with 48…
The Behringer Wing's Real-Time Analyzer (RTA) function is a feature that provides a visual representation…
SOURCE EXTRACTOR is based on the 500 series version of the noise gate section in…
The Behringer Wing GPIO Switch The Behringer Wing mixer features a GPIO (General Purpose Input/Output)…
How To Do A Virtual Sound Check Behringer Wing Rack Firmware 3.0.6-27. A digital virtual…