I often get request to do On Site Consultation for training as well as troubleshooting X/M 32 systems. If you are new to the X/M 32 Mixers and you have installation issues, then your situation can quickly become a massive nightmare. These types of situation can often be resolved via Zoom but there are some very important requirements that must be met. If you are located outside of a 500 mile range of Bristol Virginia, then I will not be visiting you at all.
However, I am extremely confident that I can still walk you through the same procedure I would be doing myself via Zoom. The cost for my on-site consultation is $1,500 plus $150 for fuel and $300 per day for room and board, with a one day minimum for room and board. Each additional day will be at a rate of $500 per day. Please click here and provide me with the information needed to complete this process as it will be needed regardless of which type of consultation service you are interested in.
You need to provide me with this information regardless if I am on-site or via zoom. There can be no misunderstanding of this required information because the last thing I want to do is make the following statement. “I hope your system is still under warranty because you have a issue inside of the mixer or stage box and you need to send it to a Qualified Behringer Repair Center” or get to your location only to find I will need a Power Lift or Scaffolding to reach your speakers. Once we have reached an agreement and the contract has been signed, then you can return to this page and submit your payment. Thank you for allowing me the Honor of working with you. Dana.
- Sound Bullet.
- dbx CT3 Advanced Cable Tester.
- Fluke 87-5 CAL Industrial True-RMS Multimeter.
- American Recorder SPL Meter.